Octagon sf 8008 not work

[coderharry]

octagon sf 8008 not working after image update is there any way to get it back it will not take a network update and there is no image in it now

[SatEmpire]

Use serial cable and update with original firmware

[coderharry]

could you give me a link to the original firmware if you could and some instructions on how to get it going would be needed to

[SatEmpire]

viewtopic.php?p=46864&hilit=Sf8008#p46864

Follow the link

[SatEmpire]

To get to the recovery menu, use the following procedure:

1. Switch off the box
2. Press and hold any button on the remote control
3. Switch on the box at the power switch
4. After 6-7 seconds, release the button on the remote control
5. then you will enter recovery mode
6. then upgrade to Network Multiboot ok, select image and start upgrade
7. When finished, start Exit and Multiboot Selector Image with OK